Horizontal Conventional Lathe CA6150

1.   Machine introduction

The main performance characteristics of CA6150 lathe products:

◆ 6150 conventional lathe headstock and bed, tailstock, pallet and other joint surfaces are manually scraped and ground. The whole machine has been strictly tested to effectively ensure the accuracy and stability of the machine tool.

◆The 6150 conventional lathe is made of high-strength cast iron and added with special materials of copper and chromium. The width of the bed guide rail is 400mm, and the quenching depth of the bed guide rail reaches 4mm, which effectively improves the wear resistance and stability of the machine tool.

◆The headstock lubrication of 6150 ordinary lathe adopts cycloid pump for forced circulation lubrication. In view of the hot weather in the south, the cleanliness and heat dissipation characteristics of the headstock are guaranteed, and the service life of bearings and gears is effectively prolonged.

◆ The main shaft of the machine tool adopts Wafangdian bearing, the through hole of the main shaft is 52/82mm, and the gear of the machine tool is precision ground, which effectively improves the hardness of the gear and reduces the noise of the machine tool.

◆The machine tool adopts domestic brand lead screw, and the screw nut adopts high-quality bronze alloy to ensure wear resistance and precision retention.

◆ The machine tool adopts a four-station high-strength tool holder, and the tool holder size: 25x25mm. 

2. Function

◆CA6150 ordinary lathe series ordinary horizontal lathes are suitable for turning inner and outer cylindrical surfaces, conical surfaces and other rotating surfaces, turning various metric, inch, modulus and diameter pitch threads, and can perform drilling and oil grooves. It is a very strong horizontal lathe, which is widely used in batch processing of various shaft and disc parts.

◆ The bed of this series of lathes is wider than ordinary lathes, the guide rail width is 400mm with high rigidity, and the guide rail surface is quenched by medium frequency, which is durable and wear-resistant.

◆The operation of the machine tool is flexible and concentrated, and the slide plate is equipped with a quick-moving mechanism. Using a single handle to visualize the operation, the pleasantness is good.

◆The structural rigidity and transmission rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable for strong cutting.

◆The machine tool is inspected in strict accordance with the inspection procedures before leaving the factory, and a strong cutting test is performed to ensure that the machine tool has good accuracy stability and processing reliability

Technical Specification  

4. List of accessories

If you need any more information. Please contact us .